Using The Single-Slot Serial Cradle - Symbol PPT 8800 Series Product Reference Manual

10. Upon connection, synchronization occurs automatically.

Using the Single-Slot Serial Cradle

Note: The following procedures pertain to both the CRD8800-1000S and
CRD8800B-1000S Single-Slot Serial cradles.
1. Ensure that ActiveSync was installed on the host computer and a partnership was
created. See Installing ActiveSync on page 4-3 and Setting up a Partnership on
page 4-4.
2. Start ActiveSync if it is not running on the host computer. To start, select Start -
Programs - Microsoft ActiveSync.
Figure 4-12. ActiveSync - Not Connected
Communications
4-13