The following selections can be made from the External 5 volts power drop-down list:
Setting
Off
Active On
Always On
The default setting is Off after a hard reset. The selected setting is maintained after soft
reset.
System Tab
The System tab displays terminal system data.
1. Select Start - Settings - Control Panel.
2. Double-tap the Symbol Settings icon.
3. Select the System tab.
Table 3-8. External 5 Volts Power Settings
5V is not supplied to the serial port.
The terminal outputs 5V while the serial port is open (by an application).
5V is always available at the serial port
Figure 3-39. Symbol Setting - System Tab
Description
Settings
3-45