General Information; Information About Documentation; Applied Symbols; Directive Weee 2012/19/Ue - Plum ecoVENT MIDI Installation And Operating Manual

2

General information

The ecoVENT MIDI controller controls the
recuperator of mechanical ventilation with a
cross-flow or rotary exchanger. Performs the
function of heat recovery from ventilated
rooms based on readings from sensors and
has the function of balanced ventilation.
Smoothly controls the air supply fan and
exhaust fan providing high efficiency of heat
recovery and air exchange in rooms based on
programmed schedules or manual control.
The controller smoothly controls additional
electric heaters, water
convector to provide the highest comfort and
precision regulation of ventilated air. Controls
the bypass and works with ground heat
exchanger GHE. It has the function of filters
support and detects their replacement and
overpressure/flow
controller works closely with the Web module
ecoNET300. It allows connection of external
control signals from the fire alarm system, air
quality sensors and other automation systems
through digital and analog inputs. Controller
signalizes and records emergency states
providing accurate system reaction. It saves
the cumulative operation time of individual
components into the counters and calculates
recuperator efficiency.
communication via Modbus RTU protocol -
provides control and monitoring of action
controller with external building management
system. Additional function of the controller is
anti-freezing protection.
The controller can be used in households,
hotels, offices or industrialized buildings.
3

Information about documentation

The controller manual is a supplement for the
recuperator manual. In particular, except for
this manual, the recuperator manual should
also be observed. The controller manual is
divided into two parts: for user and installer.
Yet, both parts contain important information,
significant for safety issues, hence the user
should read both parts of the manual.
We are not responsible for any damages
caused by failure
instructions.
cooler and
control function.
It enables
to observe these
4

Applied symbols

In this manual the following graphic symbols
are used:
The symbol means useful information and
tips.
The symbol means important information,
failure to observe these can cause damage of
property and threat for human health and
fan
life.
Caution: the symbols indicate important
information, in order to make the manual
more lucid. Yet, this does not exempt the user
from the
The
requirements which are not marked with a
graphic symbol!
5

Directive WEEE 2012/19/UE

Purchased product is designed and made of
materials of highest quality.
The product meets the requirements of the
Directive 2012/19/EU of 4 July 2012 on
waste
equipment (WEEE), according to which it is
marked by the symbol of crossed-out wheeled
bin (like below), meaning that product is
subjected to separate collection.
Responsibilities after finishing a period of
using product:
dispose of the packaging and product at
•
the end of their period of use in an
appropriate recycling facility,
do not dispose of the product with other
•
unsorted waste,
do not burn the product.
•
By adhering obligations of waste electrical and
electronic
mentioned above, you avoid harmful effects
on the environment and human health.
5
obligation to
electrical and
equipment controlled
comply with
electronic
disposal