General Information; Information About Documentation; Storage Of Documentation; Applied Symbols - Plum ecoMAX860P3-C TOUCH Installation And Operating Manual

Regulator for automatic solid fuel fired boilers
Hide thumbs Also See for ecoMAX860P3-C TOUCH:
Table of Contents

Advertisement

2

General information

The
controller
ecoMAX860P3-C
hardware version: VACC is a device designed
to control the operation of a boiler with
automatic feeding of solid fuel with a igniter.
Flame detection is performed with the use of
an optical flame brightness sensor. It can
control the work of central heating and hot
water circuits and also control the work of 5
mixing
heating
temperature of heating circuits can be set on
the basis of data obtained from the main
sensor. The possibility of cooperation with
room thermostats, separate for each heating
circuit
is
beneficial
comfortable temperature in heating rooms.
Moreover, the device turns on the spare
boiler (-gas or –oil).
The regulator may operate in connection with
additional
wire
ecoSTER200, ecoSTER TOUCH and wireless
room
thermostat/panel
eSTER_x40
installed
ecoNET300 Internet module. Additionally it
cooperates with ecoLAMBDA module and
extension modules B and C.
The regulator may be used in households
and other similar premises and in light
industry facilities.
3

Information about documentation

The regulator manual is a supplement for the
boiler manual. In particular, except for this
manual, the boiler manual should also be
observed. The regulator manual is divided
into two parts: for user and fitter. Yet, both
parts
contain
important
significant for safety issues, hence the user
should read both parts of the manual.
We are not responsible for any damages
caused
by
failure
instructions.
4

Storage of documentation

This assembly and operation manual, as well
as
any
other
applicable
should be stored diligently, so that it was
available at any time. In the case of removal
or
sale
of
the
TOUCH,
circuits.
The
required
for
maintaining
room
thermostat/panel
eSTER_x80
in
rooms
information,
to
observe
these
documentation,
device,
the
attached
documentation should be handed over to the
new user / owner.
5

Applied symbols

In this manual the following graphic symbols
are used:
- useful information and tips,
- important information, failure to
observe these can cause damage of
property,
household animal health and life.
Caution: the symbols indicate important
information, in order to make the manual
more lucid. Yet, this does not exempt the
user from the obligation to comply with
requirements which are not marked with a
graphic symbol!
6

Directive WEEE 2012/19/UE

Purchased product is designed and made of
materials of highest quality.
or
The product meets the requirements of the
and
Directive 2012/19/EU of 4 July 2012 on
waste
equipment (WEEE), according to which it is
marked
wheeled bin (like below), meaning that
product is subjected to separate collection.
Responsibilities after finishing a period of
using product:
dispose of the packaging and product at
the end of their period of use in an
appropriate recycling facility,
do not dispose of the product with other
unsorted waste,
do not burn the product.
By adhering obligations of waste electrical
and electronic equipment controlled disposal
mentioned above, you avoid harmful.
5
threat
for
electrical
and
by
the
symbol
of
human
and
electronic
crossed-out

Advertisement

Table of Contents
loading

Table of Contents