Table of Contents
Advertisement
2
GENERAL INFORMATION
The controller is a modern electronic device
designed to handling the work of the pellet
boiler using help of optical flame brightness
sensor. The device is compactly build, easy
to install.
It can control the work of central heating and
hot water circuits and also control the work
of 5 mixing
heating circuits. The required
temperature of heating circuits can be set on
the basis of data obtained from the main
sensor. The possibility of cooperation with
room thermostats, separate for each heating
circuit
is
beneficial
comfortable temperature in heating rooms.
Moreover, the device turns on the spare
boiler (gas or oil one).
The controller can cooperate with additional
steering panel located in living rooms and
additional
modul
Handling of
the
intuitive. The controller can be used within
the
household
and
buildings.
3
DATA REFERRING TO
DOCUMENTATION
The user's manual of the controller is a
complementation of boiler documentation. In
particular it is necessary to apply the boiler
documentation. The user's manual of the
controller is divided into two parts: for the
user and for the installer. However in both
parts vital information concerning safety is
included. That is why the user should get
aquainted with both parts of the user's
manual.
We do not take responsibility for damages
caused by failing to observe the following
user manual.
for
maintaining
of
lambda
λ
sensor.
controller
is
easy
in
small
industrial
4
DOCUMENTATION STORAGE
We advise you to keep carefully this user
manual of installation and maintenance and
all other valid documentation, for immediate
use when needed. In case of removal or
selling the device all the documentation
should be handed to new user or owner.
5
SYMBOLS AND MARKINGS USED
Following graphic symbols and markings are
used in the user manual:
- for relevant information and tips,
-for vital information related with
issues of property damage, health
and life risk of humans or domestic
animals,
and
Attention: by these symbols vital information
is marked. It is to allow easy understanding
of the user manual. User and installer is
however
recommendations not expressed by graphic
symbols!
6
WEEE 2002/96/EG ELECTRICITY
AND ELECTRONICS BILL
The packaging and product is to be
utilised at the end of using period by a
proper recycling company.
The
together with ordinary wastes.
The product can not be burned.
required
to
product
can
not
observe
be
disposed
5
Advertisement
Table of Contents
