Installation instructions
WD-B 550S - WD-B 950S
•
Fit the overflow pipe between the chemical wash tank and final rinse tank.
The overflow pipe between the pre-wash tank and first chemical wash tank
is kinked in the middle. This ensures that water in the dishwasher flows as
intended. This is part of its design and not a fault.
Overflow pipe between the final rinse tank (on the left) and chemical wash tank
•
Check that the chain for moving the belt goes around the lower drive wheel
(the motor chain wheel).
A
Drive unit for the washing conveyor in the outfeed
A = Chain
35-1-00-014
17
Rev. (202209)
35-1-00-012