Wexiodisk WD-B 550S Installation And User Manual page 29

WD-B 550S - WD-B 950S Rev. (202209)
Installation instructions
A
35-1-04-003
Back panel, chemical wash zone
Holes must be drilled through the back and rear hood panel of the chemical wash
section for a detergent device for this type of detergent. The chemical wash
sections are prepared for drilling by equipping the back panels with a breaker
block (A). This block is removed and holes are drilled into the back panel in the
inner hood. Seal suitably.
Liquid detergent:
B
35-1-04-002_1
Holes must be drilled for grommets in the sloping panel by the filters in the section
for a detergent device for liquid detergent. Drill the hole as close to the belt track
as possible (see B in the figure above).
25