Starting Washing - Wexiodisk WD-12S Installation And User Manual

Operating instructions

4.2.4 Starting washing

•
•
•
•
•
•
•
•
•
•
•
•
•
For longer periods between washes, the machine should be in the "normal"
mode and closed. This ensures the temperature in the machine is
maintained.
Check that the detergent is suitable for the items.
1
P1
P2
P3
309236
Remove larger food particles by rinsing the items using a hand shower.
The water in the hand shower must not exceed 40° C. Place the items to be
washed in the basket.
Open the hood (5).
Select normal load (-) or heavily soiled load (+) using the levers (12).
Select programme P1 (6), P2 (7) or P3 (8).
Slide the basket into the machine. If the machine is equipped with Autostart
(option), the hood will now close and the machine will start the wash and
the remaining washing time will be shown on the display (4).
Close the hood (5). The machine starts washing with the selected
programme. The display (4) now shows the program's remaining washing
time.
The symbol (1) is lit during the washing phase.
Once the rinsing phase starts, the symbol (3) lights up. If the final rinse
water has not reached the correct rinse temperature once rinsing starts, the
symbol (3) flashes and the machine continues washing until the rinsing
water has reached the correct temperature.
If the machine is equipped with ECO flow, this will run at the same time as
the final rinse and "CO" will be shown on the display (4). The function may
be cancelled by opening the hood using the button (5).
The hood opens automatically once the washing cycle has finished. If the
hood is opened during a washing cycle, the machine will stop and
automatically start from the beginning once the hood has been reclosed.
Once the machine has stopped, the display (4) shows the last programme
run. Remove the washing basket and allow the washed items to dry.
WD-12S
2
3
4
5
6
7
8
9
36
Rev. (202103)