BATTERIES
BATTERY TYPE
Your KANE958 uses rechargeable Nickel Material Hydride (NiMH) batteries
- Using other battery types may void your analyser's warranty.
WARNING
Although you can use Alkaline batteries you must not charge your
analyser with Alkaline batteries fitted.
Do not mix NiMH cells with different capacities or from different
manufacturers - All batteries must be identical.
REPLACING BATTERIES
Turn over your analyser, remove protective rubber cover, find battery
compartment & fit 3 NiMH "AA" rechargeable batteries ensuring
correct battery polarity. Replace battery cover & protective rubber cover.
TIME AND DATE
After changing batteries reset your analyser time & date.
CHARGING NiMH BATTERIES
Your KANE958 uses a standard Micro USB connector - For best results
turn off then connect your charger. Charging indicator will illuminate
then turn off when charging is complete.
Your first charge should be for 8 hours - Thereafter NiMH batteries can
be topped up at any time, even for short periods
If your batteries discharge and your analyser enters a low power shutdown,
1 hour charge provides approx. 2 hours continuous use.
BATTERY DISPOSAL
Always dispose of depleted batteries using approved disposal methods to
protect our environment.
KANE958 MANUAL 9