Batteries; Battery Type; Replacing Batteries; Time And Date - Kane 458s Manual

BATTERIES

BATTERY TYPE

Your KANE458s uses rechargeable Nickel Metal Hydride (NiMH)
batteries - using other battery types may void your KANE458s' warranty.
WARNING
Although you can use Alkaline batteries you must not charge your
analyser with Alkaline batteries fitted.
Do not mix NiMH batteries of different capacities or from different
manufacturers – all must be identical.

REPLACING BATTERIES

Turn over your analyser and remove its protective rubber cover. Open
the battery compartment & fit 3 NiMH "AA" rechargeable batteries –
check battery polarity is correct. Replace battery cover & protective
rubber cover.

TIME AND DATE

After changing the batteries reset your analyser's time & date.

CHARGING NIMH BATTERIES

Your KANE458s uses a standard Micro USB connector for charging
(KANE part No: USB1).
For best results turn off your analyser then connect your charger – the
charging indicator illuminates and turns off when charging finishes.
Your first charge should be for 8 hours continuously – thereafter NiMH
batteries can be topped up at any time, even for short periods.
If the analysers batteries discharge & the analyser enters a 'low power
shut down' a 1 hour charge will provide approx 2 hours continuous use.

BATTERY DISPOSAL

Always dispose of depleted batteries using approved disposal methods
that protect the environment.
10 KANE 458s MANUAL