Shortening The Cable; Cable Extension - HBM P8WT Operating Manual

12
Important
The TC value given in the specifications for the trans­
c
ducer therefore does not apply for the cable and trans­
ducer combination when connection is in a four-wire con­
figuration, where the cable percentage must be added.
6.3

Shortening the cable

If the transducer is connected to an amplifier in a six-wire
configuration, the transducer cable can be shortened as
required, without adversely affecting the measurement
accuracy.
6.4

Cable extension

Only use shielded, low-capacitance measurement cables
for extending. Ensure that connection is perfect, with a
low contact resistance.
The cable of a six-wire transducer can be extended with
a cable of the same type.
P8WT
A1643-3.0 en/de/fr