Replacement of an FP with one of a different card type
Prerequisites to replacement of an FP with one of a different
card type
Replacement of an FP with one of a different type task flow
Passport 15000, 20000 Hardware Installation, Maintenance, and Upgrade
Replace an FP with one of a different card type to change the type of services
provided by that card slot.
CAUTION
Risk of damage to equipment from software
An incompatible software load can damage an FP beyond
a field repair. Ensure that the software running on the
switch meets the minimum software requirement for a
replacement FP. For information on minimum software
requirements see 241-5701-615 Passport 7400, 15000,
20000 FP Configuration Reference.
•
You must first decommission the slot of the existing FP before installing
the replacement.
This task flow shows the two tasks you can do to replace an FP with one of a
different type. To link to either task, go to "Task flow navigation" (page 154).
Chapter 10 Function processors 153
5.2S2