Fanout Panel Replacement - Nortel Passport 15000 Hardware Installation And Maintenance

Fanout panel replacement

Prerequisites to fanout panel replacement
Fanout panel replacement task flow
Passport 15000, 20000 Hardware Installation, Maintenance, and Upgrade
Replace a fanout panel, if it fails, to restore the connections of the DS3 or E3
FPs to customer premises equipment.
• "Prerequisites to fanout panel replacement" (page 227)
• "Fanout panel replacement task flow" (page 227)
• Ensure you have access to 241-5701-600 Passport 7400, 15000, 20000
Configuration Guide for procedures in this task that are not located in this
NTP.
• You will need a fanout panel with PEC NTHW52.
• When replacing a fanout panel, all traffic passing through it is dropped.
• If the fanout panel is mounted in a NEBS 2000 frame that has a door
mounted on its front, you need the key for the door lock from kit
NTQS37.
This task flow shows the sequence of procedures you do to replace a fanout
panel. To link to any procedure, go to "Task flow navigation" (page 228).
Chapter 16 Sparing and fanout panels 227
5.2S2