Unpacking The Shasta 5000 - Nortel Passport 15000 Hardware Installation And Maintenance

Unpacking the Shasta 5000

Prerequisites
Procedure steps
Passport 15000, 20000 Hardware Installation, Maintenance, and Upgrade
Unpack a Shasta 5000 just before installing it in the shelf.
• You must be familiar with "Safety considerations and best practices"
(page 53).
1 Position the shipping crate in front of the NEBS 2000 frame. Ensure that
the 4 metal clasps are at the bottom of each corner.
2 Release each clasp by lifting the key and then turning it counter clockwise.
3 Grasp the top of the crate and lift straight up.
4 Store the upper half of the crate where it will not interfere with the
installation of the Shasta 5000.
5 Cut the metal strap that holds the Shasta 5000 to the base of the crate.
6 Locate the 2 screws in the bottom corners at the front of the Shasta 5000.
7 Unfasten the 2 screws that secure the Shasta 5000 to the crate bottom.
8 Store the screws where they will not interfere with the installation of the
Shasta 5000.
Chapter 17 Hardware procedures 869
5.2S2