Nexcom PEAK 980 User Manual page 43

Chapter 3: BIOS Setup
RC ACPI Settings
This section is used to configure RC ACPI settings.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
RC ACPI Settings
Wake System from S5 via RTC [Disabled]
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Wake System from S5
Enables or disables system wake on alarm event. When FixedTime is selected,
system will wake on the hr::min::sec specified. When DynamicTime is
selected, system will wake on the current time + Increase minute(s).
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
CPU Configuration
This section is used to configure the CPU.
Enables or disables system
wake on alarm event. When
enabled, System will wake on the
hr:min:sec
specified/Programmed by the
Tools from OS.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Intel
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
Active Processor Cores
Select the number of cores to enable in each processor package.
29
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
CPU Configuration
Type Intel(R) Core(TM)
i3-9100TE CPU @ 2.20 GHz
ID 0x906EA
Speed 2200 MHz
L1 Data Cache 32 KB x 4
L1 Instruction Cache 32 KB x 4
L2 Cache
256 KB x 4
L3 Cache 6 MB
L4 Cache N/A
VMX Supported
SMX/TXT Not Supported
Intel (VMX) Virtualization [Enabled]
Technology
Active Processor Cores [All]
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
®
Virtualization Technology
When enabled, a VMM can
utilize the additional
hardware capabilities provided
by Vanderpool Technology.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PEAK 980 User Manual