Nexcom PEAK 980 User Manual page 53

Chapter 3: BIOS Setup
Memory Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Chipset
Memory Configuration
Memory RC Version 0.7.1.113
Memory Frequency 2133 Mhz
Memory Timings (tCL-tRCD-tRP-tRAS) 15-15-15-36
Channel 0 Slot 0 Not Populated/Disabled
Not Populated/Disabled
Channel 0 Slot 1
Channel 1 Slot 0 Populated/Enabled
Size 8192 MB (DDR4)
Channel 1 Slot 1 Not Populated/Disabled
Max TOLUD [Dynamic]
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Max TOLUD
Configures the maximum value of TOLUD.
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
Graphics Configuration
Maximum Value of TOLUD.
Dynamic assignment would
adjust TOLUD automatically
based on largest MMIO length
of installed graphic controller
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or
select SG for switchable GFx.
Internal Graphics
Keep IGD enabled based on the setup options.
GTT Size and Aperture Size
Configures the GTT memory size and the Aperture size.
39
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Chipset
Graphics Configuration
Primary Display [Auto]
Internal Graphics [Auto]
GTT Size [8MB]
Aperture Size [256MB]
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Select which of IGFX/PEG/PCI
Graphics device should be
Primary Display Or select SG
for Switchable Gfx.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PEAK 980 User Manual