Nexcom PEAK 980 User Manual page 45

Chapter 3: BIOS Setup
Firmware Update Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
[Disabled]
ME FW Image Re-Flash
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Me FW Image Re-Flash
Enables or disables the ME firmware image re-flash function.
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
Trusted Computing
This section is used to configure Trusted Platform Module (TPM) settings.
Enable/Disable ME FW Image
Re-Flash function.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Security Device Support
Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.
31
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
Configuration
[Enable]
Security Device Support
NO Security Device Found
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PEAK 980 User Manual