Stb Vendor Id; Wake On Lan - ZyXEL Communications EX3510-B1 User Manual

Table 35 Network Setting > Home Networking > Additional Subnet (continued)
LABEL
Offer Public IP
by DHCP
Enable ARP
Proxy
Cancel
Apply

8.6 STB Vendor ID

Use this screen to configure the Vendor IDs of connected Set Top Boxes (STBs) so the Zyxel Device can
automatically create static DHCP entries for them when they request IP addresses.
Click Network Setting > Home Networking > STB Vendor ID to open this screen.
Figure 76 Network Setting > Home Networking > STB Vendor ID
The following table describes the labels in this screen.
Table 36 Network Setting > Home Networking > STB Vendor ID
LABEL
Vendor ID 1~5
Cancel
Apply

8.7 Wake on LAN

Wake on LAN (WoL) allows you to remotely turn on a device on the network, such as a computer,
storage device or media server. To use this feature the remote hardware (for example the network
adapter on a computer) must support Wake on LAN using the 'Magic Packet' method.
Chapter 8 Home Networking
DESCRIPTION
Click this switch to enable or disable the Zyxel Device to provide public IP addresses by DHCP
server. When the switch goes to the right
Click this switch to enable or disable the ARP (Address Resolution Protocol) proxy. When the
switch goes to the right
Click Cancel to restore the default or previously saved settings.
Click Apply to save your changes.
DESCRIPTION
These are STB's Vendor Class Identifiers (DHCP option 60). A Vendor Class Identifier is usually
used to inform the DHCP server a DHCP client's vendor and functionality.
Click Cancel to restore the default or previously saved settings.
Click Apply to save your changes.
EX3510-B1 User's Guide
, the function is enabled. Otherwise, it is not.
, the function is enabled. Otherwise, it is not.
133