Advertisement
ZYXEL EX3510-B1 Ethernet Gateway Installation Guide
Package Contents
Hardware Installation
1. Use the included blue cable to connect the blue Ethernet port in the front bedroom to the EX3510-B1's
blue WAN port as illustrated.
2. Connect the power adapter to the EX3510-B1 and wait for two minutes. Check the EX3510 front panel.
Advertisement
Table of Contents
Related Manuals for ZyXEL Communications EX3510-B1
Summary of Contents for ZyXEL Communications EX3510-B1
- Page 1 Package Contents Hardware Installation 1. Use the included blue cable to connect the blue Ethernet port in the front bedroom to the EX3510-B1’s blue WAN port as illustrated. 2. Connect the power adapter to the EX3510-B1 and wait for two minutes. Check the EX3510 front panel.
- Page 2 3. The Power LEDs will light up green as below when the setup is complete. Note: If the lights do not turn on green, please retry or contact your service provider for assistance. If you experience any issues getting connected, please reach out to Bloom Support at (877) 735-6089.
- Page 3 1. After successfully surfing the internet, please download the MPro Mesh app to your wireless device to manage your MPro Mesh. 2. Open this app and enter the EX3510-B1’s seriel number. The seriel number is on the bottom label as below. 3. Use this app to enjoy the following features:...
Need help?
Do you have a question about the EX3510-B1 and is the answer not in the manual?
Questions and answers