ZyXEL Communications EX3510-B1 User Manual page 268

Table 120 Restore Configuration
LABEL DESCRIPTION
Browse Click this to find the file you want to upload. Remember that you must decompress compressed
(.ZIP) files before you can upload them.
Upload Click this to begin the upload process.
Do NOT turn off the Zyxel Device while configuration file upload is in
progress.
After the Zyxel Device configuration has been restored successfully, the login screen appears. Login
again to restart the Zyxel Device.
The Zyxel Device automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 173 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your computer
to be in the same subnet as that of the default device IP address (192.168.1.1).
If the upload was not successful, the following screen will appear. Click OK to go back to the Backup/
Restore screen.
Figure 174 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the Zyxel Device to
its factory defaults. The following warning screen appears.
Figure 175 Reset Warning Message
Chapter 35 Backup/Restore
EX3510-B1 User's Guide
268