ZyXEL Communications EX3510-B1 User Manual page 31

Table 5 Configuration Menus Summary (continued)
LINK TAB
NAT Port Forwarding
Port Triggering
DMZ
ALG
Address Mapping Use this screen to change your Zyxel Device's address mapping settings.
Sessions
DNS DNS Entry
Dynamic DNS
IGMP/MLD IGMP/MLD
Vlan Group Vlan Group
Interface Interface
Grouping
Grouping
Security
Firewall General
Protocol
Access Control
DoS
MAC Filter MAC Filter
Parental Parental Control
Control
Scheduler Rule Scheduler Rule
Certificates Local Certificates
Trusted CA
System Monitor
Log System Log
Security Log
Traffic Status WAN
LAN
NAT
ARP Table ARP Table
Routing Table Routing Table
Chapter 2 Web Configurator
FUNCTION
Use this screen to make your local servers visible to the outside world.
Use this screen to change your Zyxel Device's port triggering settings.
Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
Use this screen to enable the ALGs (Application Layer Gateways) in the
Zyxel Device to allow applications to operate through NAT.
Use this screen to configure the maximum number of NAT sessions each
client host is allowed to have through the Zyxel Device.
Use this screen to view and configure DNS routes.
Use this screen to allow a static hostname alias for a dynamic IP address.
Use this screen to configure multicast settings (IGMP for IPv4 and MLD for
IPv6 multicast groups) on the WAN.
Use this screen to group and tag VLAN IDs to outgoing traffic from the
specified interface.
Use this screen to create multiple networks on the Zyxel Device.
Use this screen to configure the security level of your firewall.
Use this screen to add Internet services and configure firewall rules.
Use this screen to enable specific traffic directions for network services.
Use this screen to activate protection against Denial of Service (DoS)
attacks.
Use this screen to block or allow traffic from devices of certain MAC
addresses to the Zyxel Device.
Use this screen to block web sites with the specific URL.
Use this screen to configure the days and times when a configured
restriction (such as parental control) is enforced.
Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Use this screen to view and manage the list of the trusted CAs.
Use this screen to view the status of events that occurred to the Zyxel
Device. You can export or email the logs.
Use this screen to view all security related events. You can select level
and category of the security events in their proper drop-down list
window.
Use this screen to view the status of all network traffic going through the
WAN port of the Zyxel Device.
Use this screen to view the status of all network traffic going through the
LAN ports of the Zyxel Device.
Use this screen to view NAT statistics for connected hosts.
Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection.
Use this screen to view the routing table on the Zyxel Device.
EX3510-B1 User's Guide
31