Stb Vendor Id; Wake On Lan - ZyXEL Communications EX5501-B0 User Manual

8.6 STB Vendor ID

Use this screen to configure the Vendor IDs of connected Set Top Boxes (STBs) so the Zyxel Device can
automatically create static DHCP entries for them when they request IP addresses.
Click Network Setting > Home Networking > STB Vendor ID to open this screen.
Figure 78 Network Setting > Home Networking > STB Vendor ID
The following table describes the labels in this screen.
Table 37 Network Setting > Home Networking > STB Vendor ID
LABEL
Vendor ID 1~5
Cancel
Apply

8.7 Wake on LAN

Wake on LAN (WoL) allows you to remotely turn on a device on the network, such as a computer,
storage device or media server. To use this feature the remote hardware (for example the network
adapter on a computer) must support Wake On LAN using the 'Magic Packet' method.
You need to know the MAC address of the LAN device. It may be on a label on the device or in its
documentation.
Chapter 8 Home Networking
DESCRIPTION
These are STB's Vendor Class Identifiers (DHCP option 60). A Vendor Class Identifier is usually
used to inform the DHCP server a DHCP client's vendor and functionality.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
139