ZyXEL Communications EX3510-B1 User Manual page 143

The Policy Route screen let you view and configure routing policies on the Zyxel Device. Click Network
Setting > Routing > Policy Route to open the following screen.
Figure 85 Network Setting > Routing > Policy Route
The following table describes the labels in this screen.
Table 43 Network Setting > Routing > Policy Route
LABEL DESCRIPTION
Add New Policy Click this to create a new policy forwarding rule.
Route
# This is the index number of the entry.
Status This field displays whether the DNS route is active or not. A yellow bulb signifies that this DNS route
is active. A gray bulb signifies that this DNS route is not active.
Name This is the name of the rule.
Source IP This is the source IP address.
Source Subnet This is the source subnet mask address.
Mask
Protocol This is the transport layer protocol.
Source Port This is the source port number.
Source MAC This is the source MAC address.
Source This is the interface from which the matched traffic is sent.
Interface
WAN Interface This is the WAN interface through which the traffic is routed.
Modify Click the Edit icon to edit this policy.
Click the Delete icon to remove a policy from the Zyxel Device. A window displays asking you to
confirm that you want to delete the policy.
Chapter 9 Routing
EX3510-B1 User's Guide
143