The Stb Vendor Id Screen; The Wake On Lan Screen - ZyXEL Communications XMG3512-B10A User Manual

Table 33 Network Setting > Home Networking > Additional Subnet (continued)
L ABEL
Apply
Cancel
8.6 T he ST B Ve ndo r ID Sc re e n
Set Top Box (STB) devices with dynamic IP addresses sometimes don't renew their IP addresses before
the lease time expires. This could lead to IP address conflicts if the STB continues to use an IP address that
gets assigned to another device. Use this screen to configure the Vendor IDs of connected STBs, which
have the XMG automatically created static DHCP entries for them when they request IP addresses.
Click
Ne two rk Se tting
Network Setting > Home Networking > STB Vendor ID
Fig ure 55
The following table describes the labels in this screen.
Table 34 Network Setting > Home Networking > STB Vendor ID
L ABEL
Vendor ID 1~5
Apply
Cancel
8.7 T he Wa ke o n L AN Sc re e n
Use this screen to turn on a device on the LAN network. To use this feature, the remote device must also
support Wake On LAN.
You need to know the MAC address of the LAN device. It may be on a label on the device or in its
documentation.
Click
Ne two rk Se tting
Network Setting > Home Networking > Wake on LAN
Fig ure 56
Chapter 8 Home Networking
DESC RIPT IO N
Click to save your changes.
Apply
Click to exit this screen without saving.
C a nc e l
>
Ho m e Ne two rking
DESC RIPT IO N
These are STB's Vendor Class Identifiers (DHCP option 60). A Vendor Class Identifier is usually
used to inform the DHCP server a DHCP client's vendor and functionality.
Click to save your changes.
Apply
Click to exit this screen without saving.
C a nc e l
>
Ho m e Ne two rking
XMG3512-B10A User's Guide
> to open this screen.
ST B Ve ndo r ID
> to open this screen.
Wa ke o n L AN
121