ZyXEL Communications EX7710-B0 Quick Start Manual

EX7710-B0
AX11000 WiFi 6E 10G Ethernet Gateway
Quick Start Guide
Step 1
Hardware Installation
1 Use the included Ethernet cable to connect the
xDSL/cable/fiber modem's LAN port to the EX7710-B0's
10G WAN port as illustrated.
Connect the power adapter to the EX7710-B0 and
2
wait for 2 minutes. Check the EX7710-B0 front panel.
Internet xDSL/Cable/
Fiber modem
Step 2
WiFi Connection A or B
The label on the bottom of the EX7710-B0 provides 2 ways to connect your wireless device to WiFi:
Method A: Scan QR code or Method B: Using SSID
Method A: SCAN QR code to connect WiFi
1
Use your wireless device to scan the QR code on the EX7710-B0's bottom label.
2
After scanning the QR code, join this WiFi network and you can surf the internet.
1/3
A member of the Zyxel MPro Mesh™ PLUS solution family.
MPro Mesh™ PLUS Solution:
• EX7710-B0
• WX5610-B0
• MPro Mesh™ PLUS App
Visit www.zyxel.com/us/en for updated information.
3
The Power
Note: If the lights do not turn on, please retry
Package Contents
EX7710-B0 Power Adapter
Support information
https://service-provider.zyxel.com/global/en/tech-support
See the User's Guide at www.zyxel.com for more information,
including customer support and safety warnings.
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/
Copyright © 2023 Zyxel and/or its affiliates. All Rights Reserved.
/Internet /WiFi /WPS LEDs will light up when the setup is complete.
1 2
B. Using the SSID method to connect WiFi
1
The WiFi network is on the EX7710-B0's bottom label.
On your wireless device, find this SSID and enter the WiFi Password on
2
your wireless clients to surf the internet.
"ZyxelXXXXXX"
Ethernet Cable Quick Start Guide
or contact your service provider for assistance.
3
Blue On - Power is on.
Blinking - Starting up.
POWER
Red On - System failure.
Blinking - Upgrading firmware.
On
- Internet is ready.
Blue
Transmitting/receving
Blinking -
internet data.
INTERNET
On
Red - Attempt to get an IP address failed.
On - 2.4G, 5G and 6G wireless
connections are ready.
Blue
Off - 2.4G or 5G or 6G wireless
WiFi
connection is not ready or failed.
Blinking - Transmitting/receving data.
Green Blinking - WPS in progress.
Off - No WPS activity.
WPS
Orange Blinking
- IPTV SSID is paring.
Zyxelxxxxxx