ZyXEL Communications EX3510-B1 User Manual page 123

Table 31 Network Setting > Home Networking > LAN Setup (continued)
LABEL DESCRIPTION
DNS Server 1/2 Enter the first and second DNS (Domain Name System) server IP addresses the Zyxel Device
passes to the DHCP clients.
LAN IPv6 Mode Setup
IPv6 Active Click this switch to enable or disable the IPv6 mode and configure IPv6 settings on the Zyxel
Device. When the switch goes to the right
Link Local Address Type
EUI64 Select this to have the Zyxel Device generate an interface ID for the LAN interface's link-local
address using the EUI-64 format.
Manual
Select this to manually enter an interface ID for the LAN interface's link-local address.
LAN Global Identifier Type
EUI64 Select this to have the Zyxel Device generate an interface ID using the EUI-64 format for its global
address.
Manual
Select this to manually enter an interface ID for the LAN interface's global IPv6 address.
LAN IPv6 Prefix Setup
Delegate prefix Select this option and specify a WAN interface (connection) through which the Zyxel Device
from WAN automatically obtains an IPv6 network prefix from the service provider or an uplink router.
Static Select this option to configure a fixed IPv6 prefix for the Zyxel Device's LAN IPv6 address.
MLD Snooping Multicast Listener Discovery (MLD) allows an IPv6 switch or router to discover the presence of
MLD hosts who wish to receive multicast packets and the IP addresses of multicast groups the
hosts want to join on its network.
Active Click this switch to enable or disable MLD Snooping on the Zyxel Device. When the switch goes
to the right
This allows the Zyxel Device to check MLD packets passing through it and learn the multicast
group membership. It helps reduce multicast traffic.
MLD Mode Select Standard Mode to forward multicast packets to a port that joins the multicast group and
broadcast unknown multicast packets from the WAN to all LAN ports.
Select Blocking Mode to block all unknown multicast packets from the WAN.
LAN IPv6 Select how you want to obtain an IPv6 address:
Address Assign
• Stateless: The Zyxel Device uses IPv6 stateless autoconfiguration. RADVD (Router
Setup
Advertisement Daemon) is enabled to have the Zyxel Device send IPv6 prefix information in
router advertisements periodically and in response to router solicitations. DHCPv6 server is
disabled.
• Stateful: The Zyxel Device uses IPv6 stateful autoconfiguration. The DHCPv6 server is enabled
to have the Zyxel Device act as a DHCPv6 server and pass IPv6 addresses to DHCPv6 clients.
LAN IPv6 DNS Select how the Zyxel Device provide DNS server and domain name information to the clients:
Assign Setup
• From Router Advertisement: The Zyxel Device provides DNS information through router
advertisements.
• From DHCPv6 Server: The Zyxel Device provides DNS information through DHCPv6.
• From RA & DHCPv6 Server: The Zyxel Device provides DNS information through both router
advertisements and DHCPv6.
DHCPv6 Configuration
DHCPv6 Active This shows the status of the DHCPv6. DHCPv6 Server displays if you configured the Zyxel Device to
act as a DHCPv6 server which assigns IPv6 addresses and/or DNS information to clients.
IPv6 Router Advertisement State
RADVD Active This shows whether RADVD is enabled or not.
IPv6 Address Values (This section is available only when you select Stateful in the LAN IPv6 Address Assign Setup
field.)
Chapter 8 Home Networking
, the function is enabled. Otherwise, it is not.
EX3510-B1 User's Guide
123
, the function is enabled. Otherwise, it is not.