Mld Status - ZyXEL Communications EX3510-B1 User Manual

25.3 MLD Status

Use this screen to look at the current list of IPv6 multicast groups the Zyxel Device manages through MLD.
Multicast Listener Discovery (MLD) allows an IPv6 switch or router to discover the presence of MLD hosts
who wish to receive multicast packets and the IP addresses of multicast groups the hosts want to join on
its network. MLDv1 is equivalent to IGMPv2 and MLDv2 is equivalent to IGMPv3. You can configure MLD
settings in Network Setting > IGMP/MLD. To open this screen, click System Monitor > Multicast Status >
MLD Status.
Figure 154 System Monitor > Multicast Status > MLD Status
The following table describes the labels in this screen.
Table 106 System Monitor > Multicast Status > MLD Status
LABEL
Refresh
Interface
Multicast Group
Filter Mode
Source List
Member
Chapter 25 Multicast Status
DESCRIPTION
Click this button to update the status on this screen.
This field displays the name of the Zyxel Device's interface that belongs to an MLD multicast
group.
This field displays the address of the MLD multicast group to which the interface belongs.
INCLUDE means that only the IP addresses in the Source List get to receive the multicast group's
traffic.
EXCLUDE means that the IP addresses in the Source List are not allowed to receive the multicast
group's traffic but other IP addresses can.
This lists the IP addresses that are allowed or not allowed to receive the multicast group's traffic
depending on the filter mode.
This lists the IP address of members currently in the multicast group.
EX3510-B1 User's Guide
238