Turning On Upnp In Windows 7 Example - ZyXEL Communications EX3510-B1 User Manual

The following table describes the labels in this screen.
Table 34 Network Setting > Home Networking > UPnP
LABEL
UPnP State
UPnP
UPnP NAT-T State
UPnP NAT-T
#
Description
Destination IP
Address
External Port
Internal Port
Protocol
Cancel
Apply

8.4.1 Turning on UPnP in Windows 7 Example

This section shows you how to use the UPnP feature in Windows 7. UPnP server is installed in Windows 7.
Activate UPnP on the Zyxel Device in Network Setting > Home Networking > UPnP.
Make sure the computer is connected to a LAN port of the Zyxel Device. Turn on your computer and the
Zyxel Device.
Click the start icon, Control Panel and then the Network and Sharing Center.
1
Chapter 8 Home Networking
DESCRIPTION
Click this switch to enable or disable UPnP. When the switch goes to the right
is enabled. Otherwise, it is not.
Be aware that anyone could use a UPnP application to open the Web Configurator's login
screen without entering the Zyxel Device's IP address (although you must still enter the password
to access the Web Configurator).
Click this switch to allow UPnP-enabled applications to automatically configure the Zyxel Device
so that they can communicate through the Zyxel Device by using NAT traversal. When the
switch goes to the right
UPnP applications automatically reserve a NAT forwarding port in order to communicate with
another UPnP enabled device; this eliminates the need to manually configure port forwarding
for the UPnP enabled application.
The table below displays the NAT port forwarding rules added automatically by UPnP NAT-T.
This is the index number of the UPnP NAT-T connection.
This is the description of the UPnP NAT-T connection.
This is the IP address of the other connected UPnP-enabled device.
This is the external port number that identifies the service.
This is the internal port number that identifies the service.
This is the transport layer protocol used for the service.
Click Cancel to restore the default or previously saved settings.
Click Apply to save your changes.
EX3510-B1 User's Guide
, the function is enabled. Otherwise, it is not.
127
, the function