Pump Maintenance, Spare Parts And Decommissioning; Safety; Tehnical Specifications; Standards And Protections - EBARA Ego 2 slim Installation And Operating Manual

1.3

PUMP MAINTENANCE, SPARE PARTS AND DECOMMISSIONING

Pumps are designed to operate without maintenance for several years. This product and its components must
be disposed of in an environmentally friendly manner. Use waste collection services, if this is not possible, contact
the nearest Pumps Service or authorized repairers.
2

SAFETY

These instructions should be studied carefully before installing or operating the pump. They are meant to help
you with installation, use and maintenance and to increase your safety. Installation should only be performed
with regards to local standards and directives. Only qualified personnel should maintain and service these
products. Failure in following these instructions can cause damage to the user or product and can void warranty.
Safety functions are only guaranteed if the pump is installed, used and maintained as described in this manual.
3

TEHNICAL SPECIFICATIONS

3.1

STANDARDS AND PROTECTIONS

Pumps are made in according to the following standards and protections:
Protection class:
IP44
Pump type
Ego 2 (TC) slim 32-120
Ego 2 (TC) slim 40-40
Ego 2 (TC) slim 40-80
Ego 2 (TC) slim 40-120
Ego 2 (TC) slim 40-180
Ego 2 (TC) slim 50-40
Ego 2 (TC) slim 50-80
Ego 2 (TC) slim 50-120
Ego 2 (TC) slim 50-180
Ego 2 (TC) slim 65-40
Ego 2 (TC) slim 65-80
Ego 2 (TC) slim 65-120
Ego 2 (TC) slim 80-40
Ego 2 (TC) slim 80-80
Ego 2 (TC) slim 100-40
Insulation class:
180 (H)
Installation specification
Nominal pressure
PN10
21
Motor protection:
Thermal - built in
Fitting length [mm]
220
220/250
220/250
220/250
220/250
280
280
280
280
340
340
340
360
360
450