Maintenance Menu - FLIR F Series Installation Manual

Advanced Configuration
Check Calibration
1. Click the icon and set Analytics Enabled to
Yes.
2. Set Show Tracking to Classified Boxes or
Show Triggered and check the Lines box.
3. Click Save.
4. Have subjects (person, car, truck, etc) enter the
area or cross the tripwire at various distances
from the camera. The boxes should be classified
correctly and the direction across tripwires
should be as expected.
The image below shows a classified human box and tracking line in a detection region. The boxes
are white indicating an alarm condition has occurred.
3.2

Maintenance Menu

The following sections describe more advanced camera configuration options that require the admin
login. For the configuration changes in the remainder of this chapter, it is necessary to save the
changes, then stop and restart the server to make the changes effective. Additional configuration
options are available that are not described in this manual. For more information on setting or
changing these camera parameters contact the local FLIR representative or FLIR Technical Support.
The basic camera configuration settings (LAN Settings, Services, and Security Options) available
through the Maintenance Server menus are described in
When logged in as admin, additional Maintenance menus are accessible, including Sensor, Files
and Product Info.
427-0033-00-12 Version 110 February 2019
This document does not contain any export-controlled information.
2
3
Maintenance Menu > Server Page, pg. 21.
43