FLIR F Series Installation Manual page 18

Basic Operation and Configuration
On the right side are some control buttons.
Toggle Time
Figure 2-1: Live Video Web Page – admin login
The frame rate selector, in the lower right corner of the web page, allows the user to change the
frame rate in the browser from the default 8 fps up to 16 fps. This controls the frame rate of the user's
own web browser only, and does not affect the video streams to other users or to an NVR. If the live
Troubleshooting Tips, pg. 30.
video is not displayed, refer to
Help
The Help menu displays software version information. If it is necessary to contact FLIR Technical
Support for assistance, it will be helpful to have the information from this page on hand. For
information about the factory configuration of the camera refer to the Maintenance > Product Info >
Identification web page (requires Admin login).
Log out
Use this button to disconnect from the camera and stop the display of the video stream. If a web
session is inactive for 20 minutes, it will be stopped and it will be necessary to log in again.
Toggle PC/Camera time
Use this button to display either the PC time or the camera time.
Camera Control and Status
In the lower left of the screen are two indicator lights: Control and Status.
Initially the Control light is off, as in the image above, indicating the user is
not able to control the camera immediately. When multiple users are
connected to a camera, only one user at a time can issue commands to the
camera. If another user has control of the camera, the Control light is yellow.
427-0033-00-12 Version 110 February 2019 18
This document does not contain any export-controlled information.