Maintenance Menu > Server Page - FLIR F Series Installation Manual

Basic Operation and Configuration
changes (with the Save Settings button at the bottom of the page) if it is desirable to use the new
settings as a default when the camera is powered on.
When a user logs in as admin, a complete Maintenance menu is available (refer to Maintenance
Menu, pg. 43). The Maintenance menu also provides access to other configuration options.
2.3.3 Maintenance Menu > Server Page
The basic camera configuration steps are accessed through the Maintenance menu, using the
Server page. When a user logs in as expert or admin the Server page is available. The LAN
Settings, Date and Time, Server Status, and Security Options selections are described below.
LAN Settings
If the IP address of the camera is changed, the PC may no longer be on the same network and may
Set IP Address using the FLIR Discovery Network
not be able to access the camera. Also refer to
Assistant (DNA), pg. 15.
When the LAN settings are changed and the Save
button is clicked, a pop-up message will appear to
indicate the network interface should be restarted.
Once all the changes have been made and saved,
click on the Restart Network button at the bottom of
the page.
427-0033-00-12 Version 110 February 2019 21
This document does not contain any export-controlled information.