FLIR F Series Installation Manual page 47

Advanced Configuration
Step 1 Select Maintenance > Sensor > VMS Remote.
Step 2 Click + ( ).
Step 3 From the drop-down list,
select IOI Interface.
Step 4 Click Create.
Step 5 Accept the message "Data for INTERFACE2 saved
correctly".
Step 6 Using the Start button at the bottom of the page,
Stop and Start the server.
Click Accept at the prompt.
The status will show Server
Stopped.
Click on the Start button again
to restart the server.
Click Accept at the prompt.
The status will show Server
Running.
Link Cameras on trk-101-P Tracker
Link the PTZ camera and the F-Series ID from the trk-101-P web interface.
Step 1 Ensure that the F-Series ID Analytics have been calibrated (refer to
pg. 39).
Step 2 With the F-Series ID Analytics turned off, login to the trk-101-P and set presets for the
bound PTZ camera and link the preset scenes to the F-Series ID scene.
This process is only outlined here. Refer to the FLIR ioi HTML Edition Units User Guide
which can be downloaded from the ioi documents section of the product web page at:
https://www.flir.com/products/ioi-ptz-tracker/.
427-0033-00-12 Version 110 February 2019
This document does not contain any export-controlled information.
Click
Select
Click
Analytics Calibration,
47