FLIR F Series Installation Manual page 24

Basic Operation and Configuration
Services > Msg Systems
Use the Msg Systems page to setup a connection to a mail server to send outgoing email
notifications.
Consult with your network/IT administrator to determine the IP Address/name of the mail server, the
appropriate port for SMTP and authentication settings. If the email server is on a different network,
LAN Settings, pg. 21. Configure
ensure the IP default gateway and DNS servers are configured in
the Msg Systems page with mail server information and then click Save. Using the admin login,
Maintenance > Sensor > Summary Page, pg. 56.
check that Messaging is enabled. Refer to
Services > Notification Lists
Use this page to setup multiple email
addresses and other notifications that can
be sent as a result of alarms being
processed by the Alarm Manager. When a
message it sent, it can be sent to one of
three different email lists: Default
Notification List, Notification List 1, or
Notification List 2. Separate the email
addresses by commas or semicolons.
This allows the system to be configured to
send certain alarm notifications to one
group and other alarm notifications to a
different group. The appropriate
notification list is specified when setting
up the Alarm Manager rule.
427-0033-00-12 Version 110 February 2019 24
This document does not contain any export-controlled information.