FLIR F Series Installation Manual page 48

Advanced Configuration
Step 3 Ensure that the F-Series ID detection regions are setup to correspond to the presets on
the trk-101-P (refer to
Step 4 Login to the trk-101-P web interface.
Step 5 Verify that the trk-101-P is bound to a PTZ camera.
Step 6 Setup the trk-101-P for Detection from another camera with Automatic PTZ tracking.
Step 7 Follow the procedure described in the FLIR ioi HTML Edition Units User Guide to
synchronize the F-Series ID to the PTZ camera.
Select Fixed
Camera
Step 8 When finished, return to the F-Series ID and enable Video Analytics.
Devices Menu GPIO
On the GPIO page, scroll down to read the current I/O parameters. GPIO is enabled by default.
The GPIO must be wired during installation, refer to
the GPIO signals are displayed on the IO page from the Setup menu, refer to
pg. 34.
427-0033-00-12 Version 110
Creating Analytics Regions, pg.
GPIO Alarm Connections, pg.
February 2019
This document does not contain any export-controlled information.
42).
Correlation
Points
Set 8 points
on both scenes
Default
Settings
12. The status of
Input/Output (IO) Page,
48