Log Into The Camera Web Page - FLIR F Series Installation Manual

Basic Operation and Configuration
network does not have a DHCP server, the camera will default to an IP address of 192.168.0.250.
Configuring the camera for IP communications generally involves the following steps:
Step 1 Connect the Ethernet port of the camera to the existing IP camera network.
Step 2 Connect a PC or laptop to the same network.
Step 3 From the PC connected to the camera network, use the DNA utility to discover and display
the camera's current IP address.
Right-click on the camera, select IP
Step 4
Setup to change the IP address or select
between static IP or DHCP addressing.
Step 5 Double-click the camera in DNA's
Discovery List to open the camera's
web server Login page in a web browser
or point your web browser to the
camera's IP address.
Step 6 Using the web browser, configure the
camera settings, such as camera date/
time, and other parameters, so the
camera is compatible with the existing
network.
2.2.2 Log in to the Camera Web Page
Use a web browser to connect to the camera's web server using one of three User Names: user,
expert, or admin (the default passwords are user, expert, and admin respectively).
To prevent unauthorized access, change all of the login passwords (admin login required). For
information on how to change the passwords, refer to
The user login can be used to do the initial bench test of the camera. The expert login may be used
to make configuration changes such as setting the IP address and other server settings. The admin
login has access to all configuration, setup, and maintenance settings.
427-0033-00-12 Version 110
Important Note
February 2019
This document does not contain any export-controlled information.
Select IP Setup
Security Options, pg. 28.
Online manual
Right-click
16