Advanced Configuration; Setup Menu; Temperature Page - FLIR F Series Installation Manual

3

Advanced Configuration

In this chapter, additional setup and configuration settings related to the following topics are described:
When configuration changes are made with the web browser, the settings are saved to a configuration
file. It is a good idea to make a backup of the existing configuration file prior to making changes, and
another backup once the changes are finalized. If necessary the camera can be restored to its original
factory configuration or one of the saved configurations (refer to
3.1
It is necessary to have control of the camera to make Setup changes. Changes made through the
Setup menu have an immediate effect (it is not necessary to stop and restart the server). To use these
settings at power up, it is necessary to save the changes
3.1.1
The Temperature Info page displays temperature readings from the camera and Heater status. Select
the temperature units to display Kelvins, degrees Celsius, or degrees Fahrenheit. The Heater_GPIO44
427-0033-00-12 Version 110
• Setting up the video streams to optimize quality and network performance
• Optimizing the thermal image
• Setting up detection areas for Analytics
• Configuring alarm responses and email notifications
• Configuring the camera to work with a third-party VMS (ONVIF)

Setup Menu

Camera Control

Temperature Page

This document does not contain any export-controlled information.
(Save Settings, pg.
February 2019
Files Menu, pg. 57).
38).
33