Table of Contents
Advertisement
4
1.800.561.8187
M400 System Configuration
Overview
This chapter describes how to configure the system options using on-screen-display (OSD)
menus. Operating the M400 camera does not require modifying any of the factory configuration
settings. However, the OSD menus allow setting the following:
• Choose configuration options that match personal preferences such as Joystick Mode or the
default color scheme.
• Enable or disable specialized modes such as InstAlert, IceAlert, NMEA messaging, or
operating the camera in Surveillance mode.
After making updates, most of the changes persist. However, a few settings revert to the factory
default when the system is rebooted.
Not all options can be used at the same time. The way the various options interact is also
described in the following sections.
Some configuration settings are changed directly by pressing a button on the JCU II. These are
described in "JCU II Buttons" on page 17. The way some of the buttons work can be modified
using OSD menus, described in this chapter.
Main Menu
Use the Menu button to turn the OSD menu on or off. When the OSD menu is shown, the joystick
is used to navigate through the menus and select various menu entries.
Active menu item
Press right joystick button to select
End of menu symbol
Menu will loop to
the other end
432-0012-00-10 Version 110
www.
M400XR only
Figure 4-1: OSD Main Menu
June 2016
information@itm.com
.com
Additional menu items
20
Advertisement
Table of Contents
