Table of Contents
Advertisement
Manually upgrading the generator without using PC Card
881/882 Video Test Generator User Guide (Rev A.25)
In the Host Files area, locate and select the new release files (System and Library
f.
directories) to transfer to the PC card.
g. In the Host Files area, click Download. The Transfer Files dialog box appears.
h. Verify that the source file or folder and the destination folder are correct, and then
click OK. The Copying Files dialog box appears showing the status of the
operation.
When transfer is complete, click Done.
i.
4. On the generator front panel, press the Tools key. The Tools menu appears on the
generator's display as shown below.
System
Sequence
Probe
AFC
5. Choose the System item by pressing the adjacent soft key. The System menu appears
on the generator's display as shown below.
Clock
CalFactor
Network
Serial
6. Choose the Clone item by pressing the adjacent soft key. The Clone menu appears on
the generator's display as shown below.
Capture
7. Choose the Restore item by pressing the adjacent soft key. The current files on the
generator's flash memory are replaced by the new release files from the PC card. You
are prompted to confirm the restore.
8. Choose Yes to proceed with the upgrade by pressing the adjacent soft key. When
restore operation is complete, the Tools menu is displayed.
9. Restart the generator while booting from flash memory.
10. Restore any custom files to flash memory or PC card.
This procedure allows you to transfer (copy) the new release files (System and Library
directories) directly to flash memory without using a PC Card.
Follow this procedure to upgrade a generator without using a PC Card.
Reports
ImgShift
Analyzer
CEC
Clone*
Server
About
GPib
Restore
65
Advertisement
Table of Contents
