Table of Contents
Advertisement
881/882 Video Test Generator User Guide (Rev A.25)
To specify the IP address and host name of the file server:
1. Press the Tools key. The Tools menu appears on the generator's display as shown
below.
System
Sequence
Probe
AFC
2. Choose the System item by pressing the adjacent soft key. The System menu appears
on the generator's display as shown below.
*Clock
CalFactor
Network
Serial
3. Choose the Server item by pressing the adjacent soft key. The server name and IP
address appear on the generator's display.
Host IP Address
Host001
206.135.215.218
4. Press the Settings key. The Network Host screen appears on the generator's display
as shown below.
Network Host
Set Boot Host
Host Address
206.135.215.218
If the Host Address configuration option is not visible, press the soft key adjacent to the
arrow symbol by Host Name until Host Address appears.
5. Change the host address as follows:
a. Position the blinking cursor on the address digit you want to change. To do this,
press the soft key adjacent to the arrow by the address to move the cursor left or
right until it appears on the digit you want to change.
b. Adjust the value of the digit up or down by pressing the + or - keys. Repeat for each
address digit you want to change.
Reports
ImgShift
Analyzer
CEC
Clone
Server
About
Gpib
101
Advertisement
Table of Contents
