Table of Contents
Advertisement
102
Chapter 3 Networking Generators
6. (Optional) Change the host name as follows:
a. If the Host Name configuration option is not visible, press the soft key adjacent to
the arrow symbol by Host Address until Host Name appears.
b. Position the blinking cursor on the character you want to change. To do this, press
the soft key adjacent to the arrow by the name to move the cursor left or right until
it appears on the character you want to change.
c. Select the desired character by pressing the + or - keys to scroll through uppercase
letters, lowercase letters, and numbers. Repeat for each character you want to
change.
Network Host
Set Boot Host
Host Name
Host001
7. To save the changes, press the Enter (Options) key. The following choices appear on
the generator's display:
Apply Settings?
Yes
To save the changes, choose the Yes item by pressing the adjacent soft key.
To exit without saving the changes, choose the No item.
To return to the Network Host screen without saving the changes, choose the Back
item.
8. Power cycle the generator to set the server IP address.
Back
No
Advertisement
Table of Contents
