Table of Contents
Advertisement
98
Chapter 3 Networking Generators
2. Choose the System item by pressing the adjacent soft key. The System menu appears
on the generator's display as shown below.
*Clock
CalFactor
Network
Serial
3. Choose the Network item by pressing the adjacent soft key. The generator's IP address
and subnet mask appear on the generator's display as shown below.
IP Address
192.168.254.001
Subnet Mask
255.255.255.000
4. Press the Settings key. The Network Connection screen appears on the generator's
display as shown below.
Network Connection
Set TCP/IP
IP Address
206.135.215.168
If the IP Address configuration option is not visible, press the soft key adjacent to the
arrow symbol by SubnetMask until IP Address appears.
5. Change the IP address as follows:
a. Position the blinking cursor on the address digit you want to change. To do this,
press the soft key adjacent to the arrow by the address to move the cursor left or
right until it appears on the digit you want to change.
b. Adjust the value of the digit up or down by pressing the + or - keys. Repeat for each
IP address digit you want to change.
6. If necessary, change the subnet mask as follows:
a. If the SubnetMask configuration option is not visible, press the soft key adjacent to
the arrow symbol by IP Address until SubnetMask appears.
b. Position the blinking cursor on the subnet mask digit you want to change. To do this,
press the soft key adjacent to the arrow by the subnet mask to move the cursor left
or right until it appears on the digit you want to change.
c. Adjust the value of the digit up or down by pressing the + or - keys. Repeat for each
subnet mask digit you want to change.
Network Connection
Set TCP/IP
SubnetMask
000.000.000.000
Clone
Server
About
Gpib
Advertisement
Table of Contents
