Sending Commands Interactively; Common Commands - Quantum Data 881 User Manual

Sending commands interactively

881/882 Video Test Generator User Guide (Rev A.25)
telnet generatorIPaddress
Example:
telnet 192.168.254.220
2. The /tffs0> prompt appears. Type commands at the /tffs0> prompt, and press
Enter after each command.
This section describes how to send commands through an interactive command line
interface session. The generator parses command lines one at a time. Command lines
must be terminated with a carriage return (<cr>). The generator immediately echoes each
character as it is received and places it in a command line buffer. Commands are not case
sensitive.
When sending multiple commands at once, separate each command with a semi-colon.
For example, to load the 480p59 format with the SMTPEbar image, send the following
commands:
FMTL 480p59
IMGL SMPTEbar
ALLU

Common commands

• To apply an image and format to the generator hardware, enter:
ALLU
• To display the name of the format currently in the format buffer, enter:
FMTL?
• To load a format, enter:
FMTL format_name
• To apply the format to the generator hardware, enter:
FMTU
• To load an image, enter:
IMGL image_name
• To apply the image to the generator hardware, enter:
IMGU
35