Table of Contents
Advertisement
Setting the file server IP address in the generator
100
Chapter 3 Networking Generators
4. Press the Settings key. The Network Connection screen appears on the generator's
display as shown below.
Network Connection
Set TCP/IP
IP Address
206.135.215.168
If the DHCP configuration option is not visible, press the soft key adjacent to the arrow
symbol by SubnetMask or IP Address until the DHCP configuration screen appears.
Network Connection
TCP/IP
DHCP Enabled
NO
5. Change the setting to YES by pressing the + key.
Network Connection
TCP/IP
DHCP Enabled
YES
6. To save the changes, press the Enter (Options) key. The following choices appear on
the generator's display:
Apply Settings?
Yes
To save the changes, choose the Yes item by pressing the adjacent soft key.
To exit without saving the changes, choose the No item.
To return to the Network Connection screen without saving the changes, choose the
Back item.
7. Power cycle the generator to set the IP address of the generator.
You must enter the IP address of the file server in each generator so the generator can
communicate with the file server. In addition, you can also enter a name (called the Host
Name) for the file server.
Back
No
Advertisement
Table of Contents
