Table of Contents
Advertisement
Removing current files from the generators
Copying the new files to each generator
Reboot the generators
881/882 Video Test Generator User Guide (Rev A.25)
3. Copy the contents of the 882 folder to the FTP site folder. The resulting folder structure
is shown below.
Prior to upgrading the generators, you must remove the existing system and firmware file,
gateware, and resource files from the flash memory of each generator. For instructions on
removing files from the generator, see
are also installing the new files on the generator's PC card, you must also remove the
current files from the PC card.
Now you are ready to copy the new, updated system and firmware, gateware, and library
resource files to the generators to complete the upgrade. See
FTP
Browser" on page 24 for instructions.
The upgrade is now complete and you are ready to reboot the generators from the
updated system files you just copied to each generator's flash memory. Reboot each
generator by cycling the power.
"Upgrading the generator
"Working with the Generator
locally" on page 63. If you
109
Advertisement
Table of Contents
