Table of Contents
Advertisement
20
Chapter 1 Getting Started
Programming the generator's function keys
The generator is equipped with four function keys (F1 through F4) that can be
programmed as shortcuts to folders. The procedure below describes how to program the
function keys.
To program a function key as a folder shortcut:
1. Browse to the folder to which you want to create a shortcut.
2. Hold down a function key (F1, F2, F3, or F4) to assign the key to the folder.
Switching from Browse mode to Basic mode
To switch from Browse mode to Basic mode:
Press and hold the Tools key. The message Hold to enter Basic Mode appears on the
generator's display. Continue holding the Tools key until the Browse Mode status indicator
turns off and the Tools menu appears.
System
Reports
Sequence
ImgShift
Probe
Analyzer
AFC
CEC
Advertisement
Table of Contents
