RadioLink RC8X Instruction Manual page 80

Fhss, 8-channel digital proportional rc system adaptable to rc cars/boats/robots

Hide thumbs Also See for RC8X:

Table of Contents

RadioLink Electronic Limited

www.radiolink.com

② select update mode

> The following four options will appear on the screen, and "USB MODE" is selected by default.

> Turn DL1 knob to turn the yellow background cursor to "Update the specified"

③ upgrade the specified firmware

> short press the power button into the "Update the specified" mode, short press the power

button again to upgrade.

> "being updated" pop out at the bottom of the screen means the firmware is updating.

④ "update successfully" pop out at the bottom of the screen means the firmware upgrade is

successful.

Table of Contents