RadioLink RC8X Instruction Manual page 34

Rev.+jog: If set the "Dir." of the button is "Rev." and the "Type" is jog, the servo value
will reach -100 from the original value 0 when pressing the button and the servo value will to
+100 when loosen.
Nor.+lock: If set the "Dir." of the button is "Nor." and the "Type" is lock, the servo
value will reach +100 from the original value 0 when pressing the button once and the servo
value will to -100 when pressing the button again.
Rev.+lock: If set the "Dir." of the button is "Rev." and the "Type" is lock, the servo value
will reach -100 from the original value 0 when pressing the button once and the servo value will
to +100 when pressing the button again.
Note: After assigning functions to each switch in this menu, if the switch is selected again
when setting other functions, the following prompt "Do you want to replace it?" will appear. If
you want the switch to control the original function, please click "NO"; if you want the switch to
control the new function, please click "YES".
Take the above picture as an example. PS1 initially controls channel 4 by default. When PS1 is
selected again when setting the screenshot switch, the above prompt "Do you want to replace
it?" will appear. If you click "YES", PS1 will control the screenshot function and no longer control
channel 4; if you click "NO", PS1 will still control channel 4, but not the screenshot function.
PS buttons sound setting
Click 2/2 at the top right corner to switch the setting menu
to Sound setting menu. The sound of button PS1, PS2, PS3, PS4,
PS5, PSS, and PTS can be set in this menu.
Setting steps: click the blue select box named Auto
(because the default factory setting is Auto) can into the sound
setting list, select one of the sound types as the prompt tone.
You can listen to it when selected, and you can hear the prompt
tone every time you press the button after the selection.
Auto: indicate the sound type of the default factory setting.
NONE: indicate without any sound when pressing the
button, eight types of beeps can be selected.
Audio source: indicate the type of sound, "Buzzer" and
33
RadioLink Electronic Limited
www.radiolink.com