RadioLink RC8X Instruction Manual page 65

0% to 100% indicates the quick EXP/VTR/Multiple point rate, and -1% to -100 indicates the
slow EXP/VTR/Multiple point rate. The vertical cursor line moves in conjunction with the changes
of the curve rate value.
Offset: The master channel mixing center point (the point that
the direction changes) can be offset.
EXP/VTR/Multiple point curve rate: The initial value is 0%,
-100% to 100% can be selected.
Fine tune(L)/(R): To set the right and left steering curves
separately. The initial value is 0%, -200% to +200% can be
selected.
EXP curve, VTR curve, Multiple point curve mixing can be set
from master channel to slave channel. For details on how to set
each curve, please refer to:
curve.
Mixing rate:
Left: for left, forward or upside mixing amount adjustment. The initial value is 50%, -120% to
120% can be selected.
Right: for right, brake or down side mixing amount adjustment. The initial value is 50%,
-120% to 120% can be selected.
Program. Mixing1
Click 1/2 at the top right corner to switch the first programmable mixing setting page to the
second programmable mixing setting page.
Switch select: PS1 /PS2 /PS3 /PS4 /PS5 /Steering /Trigger can be selected to turn on or turn
off the programmable mixing function, select "NULL" indicate
that this function is not enabled.
Mixing: The button at the right of "Mixing" is OFF, and the
background color of the select box is grey, indicating that the
Program. mixing1 function is turn off. The button at the right of
"Mixing" is ON, and the background color of the select box is
blue, indicating that the Program. mixing1 function is turn on.
MIX mode: The button at the right of "MIX mode" is OFF,
and the background color of the select box is grey, indicating that
the EXP function of the channel2 and other settings are not mixed
The button at the right of "MIX mode" is ON, and the background color of the select box is
blue, indicating that the EXP function of the channel2 and other settings are mixed.
Trim mode: The button at the right of "Trim mode" is OFF, and the background color of the
select box is grey, indicating that the trim of the channel2 is not mixed. The button at the right of
"Trim mode" is ON, and the background color of the select box is blue, indicating that the trim
of the channel2 is mixed. When the steering or throttle channel is the master channel, trim data
can be added.
2.5.1 Steering curve
2/2
and 2.5.2 Throttle
64
RadioLink Electronic Limited
www.radiolink.com