RadioLink RC8X Instruction Manual page 33

Condition4, Program. Mixing1/2/3/4/5/6/7/8, A.B.S(brake1/2/3), Traction control, 4WS type
switching, 4WS type1(front), 4WS type2(reverse), 4WS type3(same), 4WS type4(rear), Dual ESC
(front/4WD/rear), Gyro mixing, Gyro gain, Gyro gain group, CPS mixing1/2/3/4, Brake, Start,
Engine cut, Idle up, Neutral brake, Timer start, Timer reset, Screen capture, Backlight, Telemetry
speech, Stop speech. If you select "NULL", it means will do not trigger any function except the
default function when pressing this button.
PS1: The button under the steering wheel, which defaults control CH4, can be customized.
PS2: The two buttons on the left and right sides of the handle, which defaults control CH6,
can be customized. The two PS2 buttons have the same functions that are convenient for both
left-handed and right-handed users.
PS3: The rotary knob in front of the steering wheel, the press button PS3 is integrated with
the rotary knob DL1. If set this button as PS3, pressing this button will trigger the function that
you have set, but rotating this button will not. If set this button as DL1, rotating this button will
trigger the function that you have set, but pressing this button will not. PS3 is defaults control
the backlight of the transmitter, press once to turn off the backlight and press again to turn on
the backlight, can be customized.
PS4: The button located at the base of the transmitter, which defaults control CH7, can be
customized.
PS5: The two buttons on the top left and right sides of the handle, which defaults control
CH5, can be customized. The two PS5 buttons have the same functions that are convenient for
both left-handed and right-handed users.
Steering switch (SS): It defaults control CH1, the rotating of the steering wheel, which can be
customized to turn on or turn off other functions when rotating the wheel.
Trigger switch (TS): It defaults to control CH2, the forward/brake/back of the throttle, which
can be customized to turn on or turn off other functions when triggering the throttle.
Attention: (SS) indicates the Steering Switch
(TS) indicates the Throttle Switch
For the position of the switches on the transmitter, please refer to
Dir.: Indicate the direction of the buttons, normal and reverse can be selected. Tap the blue
select box to set "Nor." or "Rev.", the corresponding servo will display as +100 or -100.
Type: lock or jog can be selected.
lock: If set the button as a lock button, it can be used as a 2-position switch, press it once to
one position, and press it again to the other position.
Jog: If set the button as a jog button, the value will reach the maximum (or the minimum)
when pressing the button, and back to the original value when loosen. For example: if set the
"Dir." of the PS1 is "Nor." and the "Type" is jog, the servo value will reach +100 when
pressing the PS1 and the servo value will back to -100 when loosen.
Nor.+jog: If set the "Dir." of the button is "Nor." and the "Type" is jog, the servo value
will reach to +100 from the original value 0 when pressing the button and the servo value will to
-100 when loosen.
32
RadioLink Electronic Limited
www.radiolink.com
1.2.5 Buttons Introduction